keyword :

Products

6 to12 Volt Kits
  • Name:
  • 6 to12 Volt Kits
  • Model:
  • View:
  • 865
  • Comments:
Detailed Info

 

2.0-Watt Panel Specifications

(many of our products have two of these panels)

Dimensions: 135x112x5 mm (5.3x4.4x0.2 in)

Mass: 105 g (3.7 oz)

Substrate: 3 mm Aluminum/Plastic

Cell Type: Monocrystalline

Cell Efficiency: 18%

Open Circuit Voltage: 7.0 V

Peak Voltage*: 6.0 V

Peak Current*: 333 mA

Peak Power: 2.0 W

Connector: 3.5x1.1 mm plug

Mount: 4 stainless steel bolts

*Panel output is computed based on cell manufacturer's data assuming 0% reduction of cell efficiency after packaging of cell strings. Electrical output tolerance +/- 10%. Under irradiance of 100 mW/cm2, absolute air mass of 1.5, at 25 °C, as per cell manufacturer's specifications.

Applications and Charge Times

This is our lowest power kit that will charge DSLRs. Learn more and select from our camera cradles here. You can also use this kit to charge smartphones and handhelds from the V15 battery.

Approximate Charge Time from two 2-Watt Panels**

Voltaic V15 Battery: 9 hours

Smartphone via Voltaic battery: 4-5 hours

Digital Camera: 4-8 hours

**For maximum power output, orient the panels towards the sun. When not angled towards the sun, output will be reduced. Dirt and scratches on the face of the panels will reduce the amount of light hitting the solar cells. Clean the panels with a damp non-abrasive cloth. Charge times are estimated based on optimal conditions and may increase in cloudy weather, high temperatures, or when panels are not angled towards the sun.

 

3.4-Watt Panel Specifications

(the Array and Fuse 10W have three of these panels)

Dimensions: 210x113x5 mm (8.3x4.4x0.2 in)

Mass: 150 g (5.3 oz)

Substrate: 3 mm Aluminum/Plastic

Cell Type: Monocrystalline

Cell Efficiency: 18%

Open Circuit Voltage: 7.0 V

Peak Voltage*: 6.0 V

Peak Current*: 566 mA

Peak Power: 3.4 W

Connector: 3.5x1.1 mm plug

Mount: 4 stainless steel bolts

*Panel output is computed based on cell manufacturer's data assuming 0% reduction of cell efficiency after packaging of cell strings. Electrical output tolerance +/- 10%. Under irradiance of 100 mW/cm2, absolute air mass of 1.5, at 25 °C, as per cell manufacturer's specifications.

Applications and Charge Times

This kit is ideal for charging tablets that charge from USB like the iPad. If the AC charger for your tablet outputs more than 5V, you need one of our laptop kits. This kit also works well for digital camera charging.

Approximate Charge Time from two 3.4-Watt Panels**

Voltaic V39 Battery: 12 hours

Smartphone via Voltaic battery: 2-4 hours

iPad 2 via Voltaic battery: 12 hours

Digital Camera: 2-6 hours

**For maximum power output, orient the panels towards the sun. When not angled towards the sun, output will be reduced. Dirt and scratches on the face of the panels will reduce the amount of light hitting the solar cells. Clean the panels with a damp non-abrasive cloth. Charge times are estimated based on optimal conditions and may increase in cloudy weather, high temperatures, or when panels are not angled towards the sun.

 

 

Related Products
KeyWords:
Shart To: